Why is braided line banned

I recommend the Owner Weighted Twistlock Hooks because they have a centering pin on the spring, and the weight also helps keep the lure from spinning. Line friction on the guides of your rod is also very important to consider to help reduce line tangles.

Less friction on your line as it leaves the spool will result in a slower, or gradual, decrease in line speed. As mentioned before, if your line slows down quickly on a cast, those coils coming off the spool will catch up to each other and tangle up.

By simply pointing your rod tip straight out after you cast and before your lure hits the water, you are helping to reduce the friction of the line on the guides of the rod. As a final tip to help with minimizing knots and tangles with your braided line, I like to apply a lubricant to my line after I put fresh line on a spool, and before every trip. And no, I do not mean squeezing a bottle of reel oil onto your line. Real Magic is a great product I like to use as it is safe for braid and applies a thin lubricant to the line.

By doing this, it reduces friction as the line leaves the spool and passes through the guides, and also makes it a bit easier to get knots out if and when they do happen. As you can see there are many variables that can cause your braided line to knot up when you cast. It really comes down to one principle — Inconsistent and abrupt changes in line speed during your cast.

You can definitely minimize the risk of getting these knots by practicing the tips that are given. It may seem like a lot, but over time it will become second nature if you practice these tips on a regular basis. Do you have any extra tips to help prevent braided line knots and tangles?

If you have a wrap that is comes off of the spool for any reason.. Get in the habit of checking that 1st wrap just as soon as you close the bail. Learned this the hard way today. My first time ever using braid in 30 years of fishing.

Lost the entire y of braid in under an hour, due to wind knots. My anger makes me want to just go right back to old faithful mono , but I felt the benefit of no stretch, particularly with the hard plastic lure I was using. Thanks for the info! I definitely understand the science behind why braid would cast further. But I get some pretty good whip on my medium rod, and can cast mono a country mile with a heavy lure. That same casting technique was not yielding the distance with braid, and was definitely leading to knots.

Thank you for the great feedback Quinn! Depending on how flexible the medium power rod is, that could be leading to your wind knot issues. Some medium power rods are softer or stiffer than others of the same rating varies from brand to brand. It was under windy conditions and casting side arm into the wind that cause some problems.

I could still see the wind blowing the line into a nice curved configuration…perhaps I should have put the brakes on an straightened the line prior of lure hitting the water. Well I lost one lure when the slowing of the lead end caused the looping of line around the spool and line snapped…lost my favorite Shimano lure. I then thought it would be good to test my new tweaked Kastmaster reflector tape, bucktail with tread teaser and ceramic red eye beads.

I had it all visual and sound. Again casting into the wind the line looped around the third ring by the time I removed the wrap the lure settled down and got caught up and had lost lure. Conducting a debriefing of what could have been done to reduce line speed issue and to enhance even and consistent spooling on the retrieve…gave way to thought of going back to mono. I am seriously considering this…sad.

I thought you gave up golf because you wanted something less stressful? Does your rod have large guides on it? Oh now you have done it. You have made fishing like golf. This was terrific advise and perfect timing for me. I have been struggling with this for quite some time. Most recently with a new longer rod and lighter braid without the heavy weights I used to fish live bait rigs in the past.

On windy days from the kayak where I predominantly fish I have had this problem in increased frequency. I am kind of limited in range of motion seated so every detail matters. At least I know there are reasons for my past mishaps that I can do something about. Thanks again. Leaderknot in between the guides causes problems. Use a 5 meter long leader so that the knot will be spooled up on the reel. This is especially helpful when you use a long rig with several hooks and stil want to use a leader.

Try it, it works! But you run into problems when kite lines cross. Black and red flies offer good profiles. Some colors, such as chartreuse, always seem to work better than other colors. Yellow-and-white and chartreuse-and-white are also favorite pairings. Red and white, which provide good contrast under many conditions, is a popular combination for many anglers.

Braided line lasts for years. I have had line companies give me their original prototype braided line to test 8 years ago and I am still using it today. There are some places that have banned braided lines because of incidents such as the braided line cutting into the monofilament line of other anglers causing them to lose their rigs, live bait, or hooked fish which led to conflicts between the anglers.

The banning of braided lines can be frustrating for many anglers. Fortunately, there are alternatives you can use instead of braided lines like Monofilament lines and Fluorocarbon lines. They each have their own benefits. However, monofilament line does grip onto the spool, so the best way to overcome this issue is to use the monofilament line as a base on the spool. There are two main methods for backing your braided line. The first is by using tape, wind the tape 5 or 6 times around the spool of the fishing reel covering it entirely with several layers.

The second is by using Monofilament line, tie a part of the monofilament line onto the spool first as backing, then secure the braided line to the monofilament line. The best way to stop wind knots in braided lines is to manually close your bail when spooling it.

Then, you need to give your braided line a strong tug to make sure it is tight. Yes, the number of strands in braided lines does make a difference. The fewer the number of strands, the better the abrasion resistance, as there are fewer strands to cause fraying when the line rubs against something strong. On the other hand, the higher the number of strands, the better the performance, as the heavier line would be cast further and sink deeper.

The reason why your fishing line might be loose and curly is that it was not spooled correctly in the first place.

This happens when you secure the fishing line directly to the spool. They range in a variety of forms, from line cutters to fishing line snips. Most work really well, and it depends on what features you are looking for to decide on which brand you will choose. I really like Boomerang snips for cutting braided lines.

Boomerang snips are a tool designed to cut fishing line. The tool excels at cutting braided and super line. It's a tool dedicated to cutting fishing lines and has an excellent price tag. Boomerang snips offer a variety of blades for cutting different types of lines. The blade is offset to the handle, which cuts 90 degrees to what's in front and behind it. Boomerang snips are perfect for getting into tight spaces when you're trying to cut braided fishing lines.

You can also use it effectively at a tricky angle. This little device, designed specifically for cutting braided lines, is small enough to place in your pocket. It also has a belt clip making it easy to grab if in a hurry.

Most of my experience has been with the Rapala Super Line Scissors. Like all tools on this list, braid scissors can cut through mono and fluorocarbon just fine as well. Unlike normal household scissors, fishing scissors tend to be hardened and designed better for cutting braided lines. When sharp they are sharp, they can be sharp enough for a good cut. If you have any trouble cutting braid, it's easier to cut braid with more tension on the line.

If for some reason, you can't get any other tools to cut your braided and only have household scissors, then you will want to find the sharpest household scissors you can get. For cutting braided lines with everyday scissors, use sharp, heavy-duty scissors designed for cutting thick material like carpet or rope if possible. Or a brand new set of kitchen scissors. To cut the braid, place your thumb and forefinger along either side of it, then pull down while keeping them on both sides until you feel resistance.

Then firmly close the blades together to cut through the braided line in one clean motion. Scissors not hardened or designed to cut braid will wear out very quickly.

They will quickly become dull and weak, leaving your braided line frayed and very hard to work. Knives are really inefficient at cutting braided lines and need to be really sharp to even get through it clean.

Pull down on one end of the braid so that you can feel resistance when pulling back out. If the line doesn't cut, then try again. Be very careful when using a knife to cut your line. It is much more dangerous than using a line cutter or scissors. After a few uses, the braided line will start to make the nail clippers dull, making cutting the line difficult. Once the nail clippers become dull, they will also start to mess up the fishing line, causing it to fray and cause more frustration.

Nail clippers are also not very effective at getting into tight spots. They only work in one direction and can be a bit fiddly.

The nail clippers are not designed for cutting braided lines, so it is best to use them only when necessary.